FANDOM


Mill

Machinery in the Mill.

Machinery Repurposing Guide is a book found in The Brigmore Witches.

Transcript

[Excerpt from Machinery Manual]

7. Rejigger Mounting and Unmounting: Remove the cover over the primary gear and set it aside. Remove the primary gear and replace it with the secondary gear from the alternate drive system. Manufacture and place dual counterbalance weights along the alternate drive system axle and unlink the damping coils at both ends. Remove and set aside the slide arm from the rejigger support. Open the slide arm piston shaft and remove the pistons. Reshape the slide arm pistons to the shorter specifications and reapply lubricant before closing the housing. Install the elongated slide arm into the rejigger support. Adjust the reverse spacer bolt at the junction between the alternate drive system axle and the new elongated slide arm until the interval suits the new application.

Location

It can be found on the second floor of the abandoned mechanic's apartment near the entrance to Drapers Ward during the mission The Dead Eels.

Ad blocker interference detected!


Wikia is a free-to-use site that makes money from advertising. We have a modified experience for viewers using ad blockers

Wikia is not accessible if you’ve made further modifications. Remove the custom ad blocker rule(s) and the page will load as expected.